Pro Kit — Owner's Guide

You Made The
Right Call.

Your Pro Kit ships with 4 polarized lenses built to cover every condition you'll fish. This page walks you through everything — lenses, fit, care, and how to get the most out of your kit.

4Polarized Lenses
TR-90Flexible Frame
60-DayGuarantee
100%UV400 Protection
Your 4 Lenses Explained

Right Lens. Right Condition.

Every lens is engineered for a specific light condition and water type. Here's how to pick the right one before you head out.

Overcast / Copper-Amber
Overcast
Copper-Amber Tint
Boosts contrast and cuts through flat light. Perfect for overcast days, low-sun mornings, and freshwater fishing where you need to spot structure under the surface.
Best for: Bass, trout, early morning & evening bites.
Offshore / Blue Mirror
Offshore
Blue Mirror Tint
Built for open water and direct sun. The blue mirror coating kills glare off the surface and gives you true colour reading — critical when you're watching for baitfish offshore.
Best for: Saltwater, open water, full sun on the flats.
Inshore / Green Mirror
Inshore
Green Mirror Tint
Ideal for shallow, weedy water and mixed light. The green tint enhances bottom contrast so you can see through the chop and pick out fish holding in structure.
Best for: Inshore saltwater, rivers, mixed sun/cloud days.
Full Sun / Dark Smoke
Full Sun
Dark Smoke Grey Tint
Maximum light reduction. Your mid-day summer lens — when the sun is directly overhead and hammering the water. No colour shift, pure light control.
Best for: Mid-day sun, high-altitude fishing, tropical water.
How It Works

Swapping Your Lenses

You can swap lenses dockside in under 30 seconds. It feels weird the first time — just be confident with it. The frame and lenses are built to take it.

Removing A Lens
  • 1
    Open the Frame

    Fold down the arm and lift the small locking tab near the temple. This releases the lens retention system.

  • 2
    Push the Lens Out

    Place your thumb on the inside of the lens and press firmly outward. Don't be timid — the lenses and frame are built tough and won't break from a firm push.

Installing A New Lens
  • 1
    Align the Lens

    Hold the lens so the flat top edge lines up with the top of the frame. Start at the nose bridge and press the lens into the channel.

  • 2
    Snap It In

    Work your way from nose to temple, pressing the lens edge into the groove. You'll hear a click at the temple when it's locked. Confirm the locking tab is closed.

  • 3
    Check the Seal

    Run your thumb around the full lens perimeter to make sure no edge is sitting proud of the frame. If it looks even, you're good to fish.

TR-90 Flexible Frame

Getting the Perfect Fit

Your TR-90 frame is slightly moldable — you can stretch or tighten it to match your head shape. Takes 30 seconds and makes a real difference in all-day comfort on the water.

Too Tight? Widen It
  • Hold the frame firmly at both temples.
  • Apply gentle, even outward pressure on both arms.
  • Hold for 10–15 seconds, then test the fit.
  • Repeat until comfortable. Small adjustments add up.
Too Loose? Tighten It
  • Hold the frame at both temples.
  • Apply gentle, even inward pressure on both arms.
  • Hold for 10–15 seconds and check the fit.
  • Repeat in small increments — easier to go tighter than to undo it.
💡
Pro Fit Tip

Warm frames are easier to adjust. If you're in cold weather, give the frame a minute in your hands before bending. Room temperature is ideal.

Keep Them Clear

Lens Care Guide

Polarized lenses have a coating that does the heavy lifting. Treat it right and these lenses will stay crystal clear for seasons. Treat it wrong and you'll degrade the coating fast.

🌊
Rinse First
Rinse with fresh water before wiping — especially after saltwater. Grit scratches.
🧽
Microfibre Only
Always use the included microfibre cloth. Dry-wipe only with a clean cloth.
💧
Lens Cleaner OK
A drop of non-alcohol lens spray is fine for stubborn smudges.
🚫
No Shirts or Paper
Shirt fabric and paper towel embed micro-scratches in the coating over time.
⚗️
No Solvents
Avoid alcohol, acetone, and household cleaners — they strip the polarized coating.
🌡️
No Hot Surfaces
Don't leave lenses on a hot dash — prolonged heat can warp the polarized film.
🎒
Storage

Store your lenses in the included carry case when not in use. The case pouches keep extra lenses scratch-free between trips.

From Anglers Who Fish These Daily

Pro Tips

A few things seasoned anglers figured out after a few trips with the Pro Kit.

  • 🌅
    Start with Overcast, Switch at Mid-Day

    The copper-amber lens is your workhorse for most freshwater mornings. When the sun climbs and glare kicks in, swap to Full Sun — takes 20 seconds.

  • 🎣
    Polarized = Seeing Fish, Not Just Water

    Tilt your head slightly when scanning structure. At certain angles the polarized lens cuts glare completely and you'll see depth you didn't know was there.

  • Pick Your Lens Before You Leave the Dock

    Changing on the water is easy, but starting with the right lens saves you the first 30 minutes of adjustment. Check conditions before you launch.

  • 🌊
    Saltwater Anglers: Rinse Every Time

    Salt crystals are abrasive. After every saltwater session, rinse the full frame and lenses with fresh water before putting them in the case. 10 seconds, saves the coating.

  • 💼
    Pre-Load a Spare

    Keep a second lens loaded in a case pouch so the swap is even faster. One for the morning bite, one ready for the afternoon switch.

We Stand Behind It

Your Guarantee

🛡️
60-Day Money-Back Guarantee

Fish the Pro Kit for 60 days. If you don't see a genuine difference in visibility, contrast, and glare cut on the water — send it back for a full refund. No runaround. We back it because the lenses work.

📧
Need Help?

Questions about your kit, a warranty claim, or a missing lens? Email us at team@grizzlyfishing.com — real people, quick replies. We fish this gear too.

More Lenses.
Same Frame.

Need a replacement lens or want to grab an extra set? Individual lenses available at grizzlyfishing.com

Shop Grizzly →